ACCESSORIES
An array of accessories are available for use with the IRIS and Vehicular GPR systems.
INSTALLATION ACCESSORIES
VEHICLE INSTALLATION SYSTEM 1 (VIS-1)
This is a complete, low-cost vehicle installation system for use with the IRIS or IRIS-P GPR. The VIS-1 will permit the IRIS/IRIS-P and antenna(s) to be used on a vehicle. The VIS-1 will install on most light vans, pick-up trucks and SUV’s that have an existing 2 inch frame mounted receiver hitch. The system can be installed in a few hours and comes with complete installation instructions. The VIS-1 will support up to 2 non-contacting antennas or 1 contacting antenna.
The Vehicle Installation System 1 (VIS-1) includes the following components:
VEHICLE INSTALLATION SYSTEM 2 (VIS-2)
This is a complete vehicle installation system which includes an antenna mounting structure, Distance Measurement Instrument (DMI) and Power Interface. This system can be used with the IRIS/IRIS-P and up to four antennas installed in a lateral array on a vehicle. The VIS-2 supports up to four non-contacting antennas or two contacting antennas on the front or rear of a vehicle and allows lateral movement of the antenna to cover all parts of a traffic lane. Typical uses include single pass inspection of pavements, bridge decks and runways. The VIS-2 is for permanent installation and can be installed on many vans, light trucks and SUV’s. Complete installation instructions are provided.
VIS-1 Vehicle Installation System
(shown with Model 30AGC Antenna)
VIS-1 Vehicle Installation System
(shown with Model 301B Antenna)
The Vehicle Installation System 2(VIS-2) includes the following components:
Note: one RMS-TSK required for each antenna
VIS-2 Vehicle Installation System
(shown with Model 30AGC Antenna)
GPR ACCESSORIES
RADAR TRANSPORT CART (PS-24-RTC)
Used for manual operation of IRIS and IRIS-P systems. The Radar Transport Cart carries one 30AGC, 60AGC or 401B/501B antenna and incorporates the IRIS high resolution DMI for distance measurement and logging.
GPR REMOTE CONTROL (PS-24-RMK)
External 17 inch LCD Display & SVGA output for IRIS or IRIS-P. Allows the use of a remote external monitor. Includes SVGA Interface and 17 inch color LCD display and Keyboard/Mouse.
Radar Transport Cart
(shown with Model 30AGC antenna)
REMOTE PROCESSING STATION (PS-24-RPS)
he PS-24-RPS is a remote station for processing IRIS GPR data in the office and includes a notebook computer, copy of IRIS Software for Windows (RDP and RDD software) and additional user license.
ANTENNA SETUP BOX (PS-24-BOX1)
This unit is used for easy setup of radar controls when interchanging antennas.
Antenna Setup Box
(used for multiple antenna systems)
BATTERY PACK (PS-24-RPC-P)
12 volt battery pack & charger, for IRIS-P. Also available as a battery belt (PS-24-BPC-B).
Battery Pack (PS-24-BPC-P)
ANTENNA CABLES
Extension and replacement cables are available for portable and vehicle based GPR installations.
Main Cable (25ft/7.6m) PS-24-CH-25
Radar Control Unit to Antenna Cable, 25ft/7.6m
Main Cable Extension (25ft/7.6m) PS-24-CH-25EXT-B
Radar to Bulkhead Cable, 25ft/7.6m - for vehicle installations
Main Cable Extension (25ft/7.6m) PS-24-CH-25EXT-S
Main Cable Extension (10ft/3m) PS-24-CH-10EXT
Antenna Cables
| ALL RIGHTS RESERVED | PENETRADAR CORPORATION | 2017 |